A full story! PVC hot water bottle use, maintenance points
Release date: [2025/4/7]  Read total of [5] times

PVC hot water bottle with its convenience and warmth, has become a useful assistant for people to fight against the cold in winter. However, many people because of improper use and maintenance, leading to premature damage of hot water bags, and even cause safety hazards. Mastering the correct method can not only extend the service life of the hot water bag, but also ensure the safety of use.

When using the hot water bottle, the rubber washer at the lower end of the lid is crucial, it is a key component to prevent water leakage. When pouring water, be careful not to let the rubber washer fall away with the water. In the water injection process, do not directly fill boiling water, and control the water temperature at about 90 ° C. Too high water temperature will accelerate the aging of rubber and shorten the service life of the hot water bag. At the same time, you must not fill the bag with greasy dirty water, such dirty water will not only make the hot water bag deformation, but also accelerate its aging.

When filling with water, do not overdo it, and it is more ideal to put a cloth cover on the hot water bag. The cloth cover can not only avoid the hot water bag from directly touching the skin causing burns, but also reduce the wear on the surface of the hot water bag.

During the idle period of PVC hot water bottlestorage is also exquisite. Do not hang it in the place where the sun can shine, the kitchen such as high temperature, fume environment is not suitable, because the sun and high temperature will promote the aging of the hot water bag material. At the same time, the hot water bag should avoid contact with acid, oil, alkali items, do not wash with a brush or soap, and can not be put together with chemicals such as mothballs, so as to avoid chemical reactions and damage to the hot water bag.

After the winter, it is necessary to dry the water droplets in the hot water bag, fill with the right amount of air, and store it in a place where the time is dry. In addition, adding a little salt to the water can not only better maintain the water temperature, but also make the warm effect more lasting.


Changzhou Yuefeng Plastic Products Co., Ltd. specializes in the production of hot water bottle, PVC hot water bottlehand warm hot water bottle, cold water sack, insert hot water bottle,,cervical spine hot water bagplush hot water bottle.