- Jangjiang +86 180 6855 6003
- Miss Sheng +86 137 0612 6383
- Address:4-18, Yangtze River Delta Mould City, High-tech Zone, Wujin District, Changzhou
-
Note: patients with winter sugar year should use hot water bag with caution
2024/7/1
-
After the temperature drops, blood vessels at all levels of the human body will contract, resulting in increased blood pressure, coupled with the effect of high glucose, it is easy to lead to diabetes patients in the winter stroke, myocardial infarction and other large vascular diseases.At the same time, diabetes patients with peripheral vascular disease combined with winter vasoconstriction, patients with peripheral ischemia symptoms will be more obvious, can show cold lower limbs, numbness, cramps, and some patients may also appear skin blistering, toe blackening necrosis and other conditions.In order to alleviate the cold in winter, many diabetics use electric blankets, PVC hot water bottles or hot water to increase the warmth of their feet. However, due to the blockage of the tiny blood vessels that supply peripheral nerves in winter and the damage of nerve fibers caused by high sugar, the occurrence and development of neuropathy in diabetic patients are also relatively serious. This neuropathy will not only aggravate the symptoms of cold, numbness and cramps in both lower limbs, but also make diabetic patients feel dull. A little carelessness may easily lead to scalds and burns on the skin of feet and other parts. If not properly handled, it will form severe diabetic feet or chronic wounds that are difficult to heal.Every winter, patients with diabetic foot and diabetic chronic skin ulcers who are caused by this cause come to the medical center. For doctors, these wounds are very difficult to manage, and many patients even need to amputate or even die. Therefore, diabetic patients must be vigilant in the heating process.Changzhou Yuefeng Plastic Products Co., Ltd. specializes in the production of hot water bottle, PVC hot water bottle, hand warm hot water bottle, cold water sack, insert hot water bottle,,cervical spine hot water bag, plush hot water bottle.......
-
Crude oil prices continue to pull up, raw material prices are polarized
2024/6/24
-
Crude oil prices continued to rise this week, the price of polyester filament has been differentiated, the price of large polyester yarn is higher, small factories are mainly to inventory, as the market gradually fades, weaving enterprises are caught in the contradiction of whether to start or not.International oil prices: continued to riseAfter entering June, the world began to usher in the peak season of oil consumption, while the demand gradually picks up, Opec + is still implementing the production reduction policy in the third quarter, so the fundamentals of the crude oil market are expected to improve, thus promoting oil prices to rise again.The third quarter is traditionally the peak period for global crude consumption, when a recovery in gasoline demand helps boost oil markets. In addition, summer is prone to disastrous weather, once the local oil production area due to force majeure and supply disruptions, will support oil prices in a short period of time. Supply also continues to play a supporting role in the oil market, Opec + the current crude oil production reduction policy will continue until the end of the third quarter, so the fundamentals of the crude oil market in the third quarter are still good as a whole, thus promoting oil prices to maintain a high level of operation.On Monday, WTI crude oil futures closed up more than 2.39 percent at $80.33 per barrel. Brent crude futures settled up more than 1.97 percent at $84.25 a barrel.On Tuesday (June 18), international oil prices rose across the board, and the US oil contract for August rose 1.33% to $80.78 / barrel. The August crude oil contract was up 1.35 percent at $85.39 a barrel.Declaration: The content and template of this article are organized from the network, and the copyright belongs to the original author; If there is infringement, please inform in time and contact to delete.......
-
Can PVC hot water bottle be directly filled with boiling water?
2024/6/24
-
Under normal circumstances, unless the product has a special purpose and is clearly marked, the PVC hot water bottle can be directly loaded with boiling water. In fact, the safety of the product under boiling water is one of the important indicators to measure the quality of the hot water bag.In addition, if the product does not have special instructions, we usually think that the hot water bag is filled with water, so its temperature is generally not more than 100 ° C. However, for safety reasons, China's standard recommends that when using hot water bags, it is more stable to choose hot water of about 90 ° C.Attention, low temperature burns are invisible killers, everyone in the use of PVC hot water bottle when filling hot water beware of low temperature burns oh!Changzhou Yuefeng Plastic Products Co., Ltd. specializes in the production of hot water bottle, PVC hot water bottle, hand warm hot water bottle, cold water sack, insert hot water bottle,,cervical spine hot water bag, plush hot water bottle.......
-
2024 Advanced fiber new material Science and Technology Innovation and high-quality development Forum held
2024/6/17
-
From the comfort and health, safety protection, intelligent and functional consumer goods close to the people's livelihood, to the national defense science and industry, transportation, new energy, life and health, modern agriculture, biomedical and other key fields that affect the national economy and people's livelihood, advanced fiber and new materials are indispensable foundation and core, playing a pivotal role. They not only affect people's quality of life, but also provide a strong support for national development and security.As a strategic and basic field of the modern industrial system, the development of advanced fiber new materials leads the innovation of products and processes, promotes the deepening and extension of product applications, and promotes the reconstruction and upgrading of the industrial system. So, in the new era of vigorously developing new quality productivity, how can advanced fiber new materials achieve technological revolution breakthroughs and iterative upgrades?Recently, Zhu Meifang, Academician of Chinese Academy of Sciences and Dean of School of Materials Science and Engineering of Donghua University, Jin Gaolin, Vice president of China Chemical Fiber Association, Wang Yuping, director of National Advanced Functional Fiber Innovation Center, Wang Rui, professor of Beijing Institute of Fashion Technology, Experts and scholars in the field of fiber textiles from Donghua University, Beijing University of Chemical Technology, Soochow University, Tianjin University of Technology, Wuhan Textile University, Shanghai University of Engineering Science and Technology gathered at the "2024 Advanced Fiber New Materials Science and Technology Innovation and High-quality Development Forum" to share insights and insights, focusing on new fiber materials for the development of emerging industries. Explore the implementation path and new model of win-win cooperation.High-end leading: setting the tone of the industrial development roadZhu Meifang, academician of the Chinese Academy of Sciences and dean of the School of Materials Science and Engineering of Donghua University, proposed in his speech that under the promotion of a new round of scientific and technological revolution and industrial change, China's fiber material industry is guided by high-quality development, and continues to enrich its own connotation through multidisciplinary and multi-field integration and innovation such as nanotechnology, biotechnology, information technology and advanced manufacturing technology. Drive industrial transformation and upgrading. For the future technological development direction of new fiber materials, Zhu Meifang put forward three suggestions: First, we should give full play to the leading role of scientific and technological innovation, give play to the innovative and subversive characteristics of new materials, and strengthen scientific and technological innovation, key technologies, green elements and sustainable development. Second, we should continue to pay attention to the green and low-carbon development of technology, improve the attention of technology research and development in environmental protection, develop degradable and recyclable materials, and promote carbon emission reduction in the industry. Third, we should vigorously improve the digital intelligence of fiber materials, use industrial Internet, artificial intelligence and big data and other technologies to build a transparent and trusted digital platform to promote industrial upgrading and digital transformation.Focusing on the three directions of high-end fiber materials, functional fiber new materials, and cutting-edge fiber new materials, experts and scholars in the field of fiber textiles have brought the cutting-edge scientific and technological achievements of universities and research institutes from the laboratory to the market, docking major research and development needs, deeply integrating technological innovation resources with the industry, and carrying out a wide range of technical exchanges and application discussions. With profound academic attainments and rich practical experience, experts and scholars shared the latest research on advanced fiber new materials, and put forward constructive insights on the development trend and future prospects of the fiber textile modernization industry.Declaration: The content and template of this article are organized from the network, and the copyright belongs to the original author; If there is infringement, please inform in time and contact to delete.......
-
Who said summer PVC hot water bag is useless
2024/6/17
-
I believe many friends will question, summer can also use PVC hot water bottles? Who said summer PVC hot water bag is useless.In the process of sleep, people will usher in the peak of detoxification, so the principle of cold head and hot foot should be thoroughly implemented in sleep. Therefore, the hot water bag is essential, regardless of spring, summer, autumn and winter.When you sleep in summer, you can wear thin pajamas or nightdresses, and then use electric fans or air conditioners to keep your upper body cool, and then put a hot water bag at your feet, and you won't feel too hot. On the contrary, it will make people sleep more soundly and improve the quality of sleep.When you feel the cold in your body is too heavy, you can use two or three or more PVC hot water bottles at the same time when you sleep, the more the better. In addition to using a hot water bottle when sleeping, don't forget to wear several pairs of socks. Because in the process of sleeping, it is inevitable to kick the hot water bag outside the quilt, or put your feet out. So, you can't take your socks off when you sleep.Changzhou Yuefeng Plastic Products Co., Ltd. specializes in the production of hot water bottle, PVC hot water bottle, hand warm hot water bottle, cold water sack, insert hot water bottle,,cervical spine hot water bag, plush hot water bottle.......
-
Children PVC hot water bottle hot compress misunderstanding should be careful!
2024/6/3
-
Note that the baby's hot cold feet are covered with PVC hot water bottles, which may cause burns, eczema, aggravate the condition, dehydration and other conditions, which is not conducive to the recovery of the disease. Because the baby's skin is delicate and its tolerance to heat is poor, it is not recommended to apply the hot water bag to the baby's body.Children PVC hot water bottle hot compress misunderstanding don't step on thunder. New mothers need to know.Eczema: baby skin is more delicate, hot cold foot hot water bag easy to cause eczema, resulting in skin papules, erythema, and even erosion;Scalding: hot water bag temperature is high, if the hot water bag is applied to the sole of the baby's feet, it may cause burns to the skin on the sole of the feet due to high temperature, resulting in skin swelling, pain, severe cases will also blister;Dehydration: If the hot water bag is applied to the soles of the baby's feet, because of its own poor metabolic capacity, it is easy to cause water and electrolyte disorders, and dehydration. When the baby is dehydrated, the baby can appear listless, sunken eye sockets, dry skin and other conditions, if the treatment is not timely, and even shock performance, endangering the baby's life.Aggravating the condition: If the baby is allergic, the process of using hot water bag on the soles of the hot cold feet may contact sensitizing substances, resulting in allergic reactions, local itching, redness and other manifestations can further aggravate the skin damage, which is not conducive to the recovery of the disease;Warm reminder: If you want to give your baby a hot compress, you can soak your feet with warm water, which is conducive to promoting blood circulation and removing the cold. You can also use wormwood water to soak your baby's feet under the guidance of a doctor, which is conducive to improving cold symptoms.Changzhou Yuefeng Plastic Products Co., Ltd. specializes in the production of hot water bottle, PVC hot water bottle, hand warm hot water bottle, cold water sack, insert hot water bottle,,cervical spine hot water bag, plush hot water bottle.......
-
How to buy PVC hot water bottle
2024/6/3
-
How to buy PVC hot water bottle, from these points to see the quality of hot water bottle.Water leakage resistanceThe water leakage resistance of the hot water bag is mainly related to the thickness of the bag body, tensile strength, and the tightness between the lid and the thread opening.Safety of irrigationWater injection hot water bag is, after all, the hot water into the bag, so it must be safe when filling water, do not burn yourself. Try to choose a large caliber hot water bag and a splash proof design, you can reduce the risk of burns.Warm tip: When the hot water just opened, do not pour it immediately, 100℃ hot water poured into the hot water bag will not burn yourself, so wait for it to cool for a while and then pour.smellRubber hot water bag is mainly composed of rubber and chemical additives, PVC material will be added in the production of plasticizers for processing, high temperature will emit some odor. Therefore, the general hot water bag in the first use of more or less will have a little rubber smell, after three or four times of use, this smell is basically no more, if you buy a hot water bag used many times or have an unpleasant smell, then the warm water bag is not up to standard.Insulation performanceThe thermal insulation performance is closely related to the material, thickness and sealing of the hot water bag. The cooling speed of the warm water bag made of PVC is generally slower than that of rubber, PE, bio-based materials, so its thermal insulation effect is naturally better; The thicker the bag, the slower the heat dissipation rate, the better the insulation effect. The tightness depends on the bite and tightness of the lid and the thread opening.Changzhou Yuefeng Plastic Products Co., Ltd. specializes in the production of hot water bottle, PVC hot water bottle, hand warm hot water bottle, cold water sack, insert hot water bottle,,cervical spine hot water bag, plush hot water bottle.......
-
Recently, polyester raw materials have launched a wave of rebound trend
2024/5/27
-
Recently, polyester raw materials have launched a wave of rebound trend. Among them, PTA once again challenged the 6000 mark pressure, and MEG also rebounded nearly 200 points from the low point. At the same time, polyester factories have eased the pressure on inventories through a wave of profits and production cuts.Supply in a phased narrowing situationFrom the PTA market point of view, although the centralized maintenance situation appeared in stages in April and May, since the second quarter, the load from the terminal loom has moved down slightly, and the polyester link to the warehouse is not smooth due to boiler transformation and environmental protection problems after the superposition of May 1. So that PTA in the continuous accumulation of 3 months, the April-May to the inventory range is only 1/2 of the first quarter of the inventory range.According to the central rate of the exchange rate, the recent PTA spot processing fee fluctuates at 350-400 yuan/ton. At present, a single set of devices with a capacity of less than 1 million tons are in the parking state; In a single set of devices with a production capacity of 100-225, the proportion of devices in a long stop reaches 31%, and a single set of devices with a production capacity of more than 2.5 million tons are basically upstream and downstream supporting, and there are certain advantages in cost, in addition to the normal maintenance of the device, the other are normal operation.Declaration: The content and template of this article are organized from the network, and the copyright belongs to the original author; If there is infringement, please inform in time and contact to delete.......
-
Summer hot water bottle use caution low temperature burns
2024/5/27
-
Summer is hot, summer use PVC hot water bottle health, beware of low temperature burns."Cold burn" refers to local skin damage caused by prolonged contact with a liquid or solid at a lower temperature (as opposed to boiling water). This is a relatively popular statement, in fact, for the specific temperature of low-temperature burns, the industry has no clear statement. In general, the temperature threshold for skin burns is 45 ° C. Studies have shown that hot water at 44 ° C for 6 hours will cause irreversible damage to skin basal cells, while hot water at 45 ° C only takes 1 hour to cause skin burns. If the water temperature reaches or exceeds 70 ° C, it only takes 1 second to cause a burn through the skin. Therefore, the heat source of low-temperature burns should be about 45-50 ° C, because the water temperature is too high for humans to tolerate for a long time and cannot reach the conditions of burns. Unlike our usual hot water burns or flame burns, low-temperature burns are not found until a long time after injury because the temperature of the injury is not high and has a strong concealment.Symptoms of low temperature burns: low temperature burns are often only a blister on the surface of the skin at the beginning, generally about 2-4 cm in diameter, accompanied by not obvious pain, the base of the blister is purplish red or white after accidentally bursting. Because the wound is not large and the pain is not obvious, patients often use external scalding ointment or Chinese medicine. The wound will repeatedly scab and then repeatedly collapse, prolonged and not healed, and eventually it will take 2-3 months or even about half a year to heal, and the local scar will be left after healing. In patients with chronic diseases such as diabetes and lower limb varicose veins, the wound healing time is longer and surgical intervention is often required.How to deal with low temperature scald?Once a low-temperature scalded wound is found, the patient should not treat it by himself. You should go to a hospital with a burn specialty, and the doctor will decide whether to change the dressing or recommend surgery according to the condition of the wound.Changzhou Yuefeng Plastic Products Co., Ltd. specializes in the production of hot water bottle, PVC hot water bottle, hand warm hot water bottle, cold water sack, insert hot water bottle,,cervical spine hot water bag, plush hot water bottle.......
-
The whole route rose, South America was the first to ship, and the freight rate rose to the sky
2024/5/22
-
This round of freight price increase is mainly affected by many factors. First of all, the occurrence of the Red Sea crisis led to the strain of shipping capacity, shipping companies in response to the shortage of shipping capacity and took measures to stop shipping, further increasing freight rates. Secondly, the shortage of containers has also exacerbated the increase in container prices. In addition, with the recovery of demand in all continents, the demand for freight transportation increased, which also had a positive impact on the price of consolidated freight.However, in this round of early arrival of the bulk transportation price surge, small and medium-sized freight forwarders did not get too much good. Due to the price increase of shipping companies, customers are more inclined to compare prices, and the competition between freight forwarders has intensified, resulting in more difficult business. Some freight forwarders said that they are now facing market conditions such as "difficult to obtain a container", "rising sea prices across the board" and "dumping containers", which have brought great pressure to the operation.According to the latest edition of the Shanghai Container Freight Index (SCFI), the four major routes rose across the board, Europe rose slightly lower, the United States increased more significantly, the most ferocious increase is South America, South Africa and West Africa routes, and South America routes are rising sharply for several weeks. It is worth noting that the freight rate from Shanghai to South America's basic port market has doubled from the beginning of the year (January 5), an increase of 130.47%.Recently, the global shipping market has seen a series of significant changes, especially in the South American routes. A number of shipping companies, including CMA CGM and COSCO, are increasing their capacity investment in the South American market and opening new South American routes. The move is in response to South American countries such as Brazil increasing import taxes on items such as electric cars and solar panels. Due to the increase in tariffs, many customers want to be able to ship to South America first to avoid the increased tariff costs.According to the website of China's Ministry of Commerce, Brazil has decided to impose a 10.8% MERCOsur external uniform tariff on photovoltaic module products, but in order to adapt the market to this new regulation, the relevant agencies have set a tax-free quota that will decrease year by year until 2027. Since 99% of Brazil's solar panels come from China, the sooner Chinese PV companies can export to Brazil, the less tariff restrictions they will face.In terms of electric vehicles, Brazil also plans to increase import tariffs on electric vehicles in a gradual manner, with the tax rate increasing to 35% by 2026, while the zero-tariff import quota will be reduced year by year until it is abolished in 2026. The policy change has led Chinese automakers to ramp up exports, with South America becoming an important market.Due to the shortage of ro-ro shipping capacity, container shipping has become one of the alternatives to automobile transportation. Recently, the shipments of some car companies such as BYD have increased significantly, resulting in some freight forwarding space being occupied by these car companies. In addition, freight rates on West African routes are rising as capacity from West Africa is redeployed to South America.According to the data of the Shanghai Shipping Exchange, in China's export container freight index on May 17, the South American route, the East-West Africa route, and the South African route rose higher, reaching 15.9%, 14.1%, and 11.7% respectively. Especially in the African route, the freight of individual points has risen to $10,000 a container, while in the off-season, the cost is only $2,000 to $3,000. The cost of shipping on South American routes has also risen from the usual $2,000 to $3,000 to about $7,000.Declaration: The content and template of this article are organized from the network, and the copyright belongs to the original author; If there is infringement, please inform in time and contact to delete.......
-
Summer is here, hot water bottle really laid off?
2024/5/22
-
Summer arrived, PVC hot water bottle really laid off? What is the use of hot water bottle?Discomfort caused by air conditioning: When the air conditioning is cold in the staff office; The elderly blow air conditioning at home, causing joint pain, shoulder, back and abdominal discomfort, can be appropriate with hot water bags to drive away the cold.Middle-aged and elderly people have waist and leg pain: you can directly put the PVC hot water bottle on the painful part; You can also put the hot water bag on the bed for about an hour before going to sleep, lying flat on the waist, as an auxiliary measure, long-term adherence to the treatment of low back pain effective.After eating cold food stomach pain, use a hot water bag to apply, can relieve the pain.Women improve the body cold physique: there are women menses when the stomach and waist are sore, warm with PVC hot water bottle to reduce symptoms. Hot compress has certain benefits for uterine cold and pelvic adnexa problems. Girls physique are relatively cold, cold body and cold hands and feet caused by dysmenorrhea is a common reason for women.In order to improve the body cold physique is mainly suitable for exercise, increase resistance and immunity, while paying attention to diet, do not eat too much cold food.Summer PVC hot water bottle can also be applied to the knee qi activating blood, improve local blood circulation, accelerate blood circulation, accelerate the metabolism of local inflammatory factors, can play a certain clinical effect, but it is recommended to use a warm channel, Qi activating blood, cold and pain relief Chinese medicine for external application, the effect will be doubled.Changzhou Yuefeng Plastic Products Co., Ltd. specializes in the production of hot water bottle, PVC hot water bottle, hand warm hot water bottle, cold water sack, insert hot water bottle,,cervical spine hot water bag, plush hot water bottle.......
-
The chemical fiber industry is gradually entering the overhaul cycle, and polyester raw materials are intertwined in the future or long and empty
2024/5/13
-
May 1 crude oil fell, to a certain extent, bearish polyester raw materials, superposition the traditional season of textile "gold three silver four" in the past, the terminal weaving market gradually weakened, market expectations began to weaken, PTA, polyester filament gradually into the overhaul cycle, polyester raw materials in the future.PTA maintenance: Enter the destocking cycleIn April 2024, the PTA supply and demand side showed a destocking pattern. Yizheng and Taihua plant put into operation in the month, and the production capacity increased; However, due to the maintenance of PTA devices in some factories, the output is expected to be 5.64 million tons, which is lower than last month; Operating rate maintained 76.60%; Inventory accumulated to 2.533,000 tons; Import and export data were little changed; Apparent consumption decreased from the previous month; The theoretical processing fee of enterprises maintained 311 yuan/ton, which fell slightly from the previous month.During the May Day, the PTA reduction and shutdown device continued, and the capacity utilization rate was stable at 81.29%. Considering the tight supply at the near end and the planned maintenance of multiple sets of devices after the holiday, the market has transitioned from a volatile market to a benign expectation.In early May, Hengli Dahua 1#, Honggang Petrochemical 2#, Dongying Weilian, Jiaxing Petrochemical 2#, a total of 9.4 million tons of equipment is scheduled to be overhauled, and it is expected that the capacity utilization rate will be nearly 10 percentage points lower than before the holiday to 71%, and the daily storage will be more than 15,000 tons. Supply is tight in some areas.For the terminal weaving industry, although the shipment situation is very good this year, but from the perspective of profit, even not as good as the past few years, many enterprises conventional selling prices are basically the last few years of the sale price, the largest shipment of conventional products is basically a small profit, and a large number of did not flow into the consumer market, but was purchased by spot enterprises.Because there is a large number of spot in the market, cushioning the price impact brought by the supply and demand relationship, even if the market demand increases, the price of conventional grey cloth is difficult to rise sharply in the short term as in the past.Therefore, at this stage, weaving enterprises are very resistant to high-priced raw materials, raw material prices are easy to fall and difficult to rise, and there is a phenomenon of "no promotion and no replenishment".Overall, polyester raw materials in the future has strong support on the supply and demand side, but the terminal weaving enterprises even in March and April are difficult to accept the price increase, the market is weak in May, perhaps the acceptance level will be lower, and the future polyester raw materials or continue to shock the trend.Declaration: The content and template of this article are organized from the network, and the copyright belongs to the original author; If there is infringement, please inform in time and contact to delete.......